I still remember the first time I tried to drill through a piece of hardened steel. I was in my mid-20s, working late in my garage workshop on a DIY metal frame project. I had the confidence, the tools—or so I thought—and a deadline. I grabbed a regular drill bit, lined it up, and pushed forward. Within seconds, the bit overheated, dulled out, and the steel barely had a scratch. If you’ve ever been in that frustrating situation, trust me—I’ve been there too.
Drilling through hardened steel isn’t like working with soft metals or wood. It’s tough, literally. Without the right knowledge and tools, you’ll end up with broken bits, burnt tips, and a bruised ego. But don’t worry—that’s exactly why I’m writing this guide.
With a Master’s degree in Mechanical Engineering and over 15 years of hands-on experience using drills, drill presses, and heavy-duty tools in both professional and personal settings, I’ve seen what works and what fails—up close and personal. From construction sites to precision machining shops, I’ve learned how to handle hardened steel the smart way.
In this guide, I’ll walk you through everything you need to know—from choosing the best cobalt or carbide drill bits, to understanding the right speed, pressure, and cooling fluids. Whether you’re a DIY enthusiast, a seasoned woodworker branching into metalwork, or a construction pro looking for a quick refresher, I’ll help you avoid common mistakes and get clean, accurate results.
Ready to drill smarter, not harder? Let’s dive in.
Article Summary
What Is Hardened Steel and Why Is It So Tough?
Definition and Common Uses of Hardened Steel
Hardened steel is steel that’s been treated with heat to make it stronger and more wear-resistant. The process, called heat treatment, involves heating the steel to a high temperature and then quickly cooling it—usually in oil or water. This hardens the surface and improves its strength.
I’ve worked with hardened steel in everything from industrial tool parts to automotive components. You’ll often find it in machine shafts, cutting tools, gears, and even high-security locks.
If you want to learn more about the technical side of this process, ASM International has a great breakdown on heat treating metals.
Why Regular Drill Bits Fail on Hardened Steel
Most standard drill bits just can’t cut it—literally. That’s because the surface of hardened steel is much stronger than mild or soft metals. When I first used a regular high-speed steel (HSS) bit on a hardened bolt, it dulled within seconds and began to smoke.
Regular bits wear down quickly, overheat, and lose their cutting edge. That’s why you need tougher materials like cobalt or carbide.
EngineeringToolBox explains the hardness scale if you’re curious about the actual numbers behind it.
Types of Hardened Steel You Might Encounter
There are several types of hardened steel. Here are the most common ones I’ve drilled into over the years:
- Case-hardened steel – only the outer layer is hard; the core remains soft.
- Tool steel – used for making tools and dies, known for toughness.
- High-carbon steel – often used in cutting tools and springs.
- Alloy steel – mixed with elements like chromium or molybdenum for extra strength.
Each of these has its own quirks. Case-hardened steel, for example, can sometimes trick you—you think it’s soft until your bit hits that hard outer shell.
Tools You’ll Need Before You Start
Best Drill Bits for Hardened Steel (Cobalt, Carbide, etc.)
The drill bit is the real MVP here. Through years of trial and error, here’s what I trust:
Drill Bit Type | Material | Best For | Notes |
Cobalt (M35/M42) | Cobalt alloy | Most types of hardened steel | My go-to bit—strong and long-lasting |
Carbide | Tungsten carbide | Extremely hard alloys | Super tough but brittle—use with care |
Titanium-coated HSS | High-speed steel w/ coating | Mild steel, not hardened | Won’t last long on tough metals |
If you’re unsure which to pick, I usually recommend starting with a M42 cobalt drill bit set like this one from IRWIN for its heat resistance and durability.
Recommended Drills: Hand Drill vs Drill Press
Both hand drills and drill presses can work—but each has pros and cons.
- Hand Drill – Great for portability and quick jobs. You need strong hands and patience.
- Drill Press – Offers more control, constant pressure, and better accuracy.
When I work in the shop, I always reach for the drill press. It gives me more control over feed rate and lets me maintain consistent speed—two things that matter a lot when working with hardened steel.
Essential Safety Gear and Protective Equipment
Don’t skip safety. Metal drilling can send hot shavings flying. Here’s what I always wear:
- Safety goggles or full face shield
- Cut-resistant gloves
- Ear protection (especially with a drill press)
- Apron or thick shirt to avoid hot chips hitting your skin
If you’re new to metalworking safety, check out OSHA’s eye and face protection standards for metal drilling.
Lubricants and Cutting Fluids for Smooth Drilling
Cutting fluids reduce heat, prevent bit damage, and make your life way easier. I’ve used these successfully:
- WD-40 – okay for light steel, not ideal for hardened metal
- Motor oil – works in a pinch, better than nothing
- Specialty cutting oils – like Tap Magic, ideal for steel and alloys
Without fluid, even the best bit will heat up and fail fast.
Step-by-Step Guide – How to Drill Through Hardened Steel
Step 1: Secure the Steel – Vise or Clamp
Before you drill, lock that steel piece down. I use a heavy-duty bench vise or metal clamps on a flat surface. If it shifts, you’ll break your bit or worse—injure yourself. Never hold it with your hand.
Step 2: Mark and Punch a Starting Point
Use a center punch and hammer to make a small dent where you want to drill. This prevents the bit from skating across the surface. I never skip this step—it’s a small detail that makes a big difference.
Step 3: Use the Right Drill Speed and Pressure
Speed matters. For hardened steel, slower is better. I usually run my drill press at 300–500 RPM, depending on the bit size. Push with steady, gentle pressure—don’t force it.
Here’s a general rule: the harder the material, the slower the speed. You can cross-check speeds with this handy machining speed chart from MachiningDoctor.
Step 4: Apply Cooling Fluid Continuously
Drilling builds heat fast. I keep a small bottle of cutting fluid nearby and drip it onto the bit every few seconds. You can also pause drilling and apply fluid manually.
Don’t wait for smoke—that means you’re already too hot.
Step 5: Let the Drill Bit Do the Work (Avoid Forcing It)
Let the bit cut at its own pace. If you press too hard, you risk overheating or snapping the bit. I’ve ruined expensive bits this way when I was impatient.
Watch for clean metal shavings. If you’re getting dust or smoke, something’s wrong.
Step 6: Finish and Clean the Hole Properly
Once you’re through, back the bit out slowly. Clear the hole with a wire brush or compressed air (wear goggles!). I often use a deburring tool to smooth the edges so no one gets cut later.
Common Mistakes to Avoid When Drilling Hardened Steel
Drilling Too Fast or Without Lubrication
This is one of the biggest mistakes I see. Beginners often crank up the drill speed, thinking faster is better. But when it comes to hardened steel, slower is safer. Fast drilling builds up heat, dulls your bit, and can even harden the steel more through friction.
And never skip lubrication. I once forgot to apply cutting oil while working on a hardened gear. The result? A glowing red bit and zero progress. Machinery Lubrication explains how cutting fluids help reduce friction and heat.
Using the Wrong Type of Bit
I’ve had folks ask me if a regular wood bit can work on hardened steel. The answer is no. You’ll need cobalt or carbide bits, as mentioned earlier. Using a weak bit leads to frustration, damage, or injury.
If you’re unsure which one to buy, go with cobalt for a balance of toughness and cost. Carbide is for heavy-duty or high-precision jobs.
Applying Too Much Pressure
This is another common issue—especially with hand drills. Pressing too hard doesn’t speed up the process. It just overworks the motor, overheats the bit, and can even break the material.
Let the drill and bit do the work. If you need to force it, something’s wrong—either the bit is dull, or the speed and fluid are off.
Here’s a good article from Fine Woodworking that talks about pressure and feed rate, even though it’s mostly for wood. The concept still applies.
Skipping the Punch Mark
This tiny step makes a massive difference. If you don’t punch a guide hole first, the drill bit will wander across the surface, especially with a hand drill. I learned this the hard way drilling into a thick lock casing—the bit scratched the surface and wouldn’t center.
Always take the time to punch a small divot. It keeps the bit in place and gives you control from the start.
Maintenance and Care for Your Drill Bits and Tools
How to Clean Drill Bits After Use
After a long drilling session, your bits are usually covered in metal shavings and cutting fluid. I let mine cool down, then wipe them clean with a soft cloth and a dab of light machine oil. It keeps them from rusting and removes grime.
If there’s any gunk left in the flutes, I use a brass wire brush to clean it out. Just be gentle—you don’t want to chip the cutting edge.
Sharpening Tips for Cobalt and Carbide Bits
Sharpening drill bits saves money and keeps them effective. I use a bench grinder with a drill bit sharpening guide to get a consistent angle. Cobalt bits can be resharpened multiple times.
Carbide bits, though, are trickier. They’re brittle and require diamond grinding wheels. Unless you’re experienced, I recommend getting carbide bits professionally sharpened or just replacing them.
Proper Storage to Prevent Rust
Humidity can ruin your tools if you’re not careful. I store all my bits in labeled plastic cases with silica gel packets to absorb moisture. You can also coat them lightly in oil before putting them away.
Keeping them dry, clean, and organized helps them last much longer.
When to Replace Worn-Out Bits
You’ll know a bit is done when:
- It starts squealing or smoking even at slow speed
- It won’t cut, just spins without progress
- The tip is rounded or chipped
- Shavings come out as dust instead of coils
I always say: Don’t baby a dead bit. Toss it and get a fresh one—it’ll save you time and prevent tool damage.
Conclusion
Recap the Key Takeaways
Drilling through hardened steel isn’t impossible, but it does take the right tools, prep, and patience. You need a cobalt or carbide bit, slow speed, cutting fluid, and steady pressure. Skip any of these, and you’re setting yourself up for frustration—or worse.
Encourage Safe Practices
I’ve seen too many people ignore safety and pay the price. Always wear eye protection, use a vise or clamp, and respect the metal. Hardened steel isn’t forgiving.
Final Thoughts from Personal Experience
After years in the shop and on-site, I’ve drilled everything from hardened bolts to tool-grade steel plates. Every job taught me something new. And if there’s one lesson I’d pass on, it’s this: take your time. Rushing through hardened steel never works—it just ruins tools and burns you out.